UYUNI FLAMELESS OUTDOOR

WH78078 Pillar
7.8cm x 7.8cm (3” x 3”)*

WH78013 Pillar
7.8cm x 12.7cm (3” x 5”)*

WH78017 Pillar NEW SIZE
7.8cm x 17.8cm (3.0” x 7”)*

WH10178 Pillar NEW SIZE
10.1cm x 7.8cm (4.0” x 3”)*

WH10113 Pillar NEW SIZE
10.1cm x 12.8cm (4.0” x 5”)*

WH10117 Pillar NEW SIZE
10.1cm x 17.8cm (4.0” x 7”)*

• Made from durable ABS plastic, with certified UV and weather resistant properties
• Patented 3D Wick design that looks good from every angle in the room
• Flat top edge looks like a new candle every time it is lit
• Economical as well as stunning, 2 x C batteries will offer more than 1000 hours of ambient outdoor mood lighting.
• Built in 6-hour timer function with manual 24 override option so you can enjoy instant candlelight without lifting a finger
• Remote enabled (remote sold separately) with 4 timer modes and 3 levels of brightness, allowing you to personalise every occasion
• Presented in stunning new European inspired packaging, giving the gift of light never looked more elegant
• *Add an additional 2.8cm for the height of the flame cap
• Temperature Range – 10C ~ 40C
• Water Resistant Rating – IPX5 Certified

The remote is sold separately on purpose, as you only need one remote control to turn on and off multiple candles. Be sure to read the instruction sheet that is included with the remote control, as the options are quite extensive. When first turned on, the candles will always default to the median level of brightness which is at 60% power.

How To: Change the batteries and use the remote control

1. Unscrew the screws
2. Insert the batteries
3. Tighten the screws again
4. Turn on the candle with a single push on the “on button” (if you hold in the “on button” for a little while, you turn on the 6H built-in timer. Pls. don’t do so, if you want to operate the candle with the timer function on the remote)
5. Point the remote towards the candle – try to turn it off by pressing the “Off” button. Turn it on again by pressing the “On” button, now chose the timer function you want (4H, 6H, 8H, 10H). The timer function is activated, when the flame blinks twice. In this video I have activated the 4H timer around 14 pm. The candle will now light for 4 hours, then turn off, and automatically turn on the next day at the same time, around 14 pm, and so forth

If you don’t want to use the remote timer on the outdoor candle, you just have to skip the last part in the video (by not pushing the timer function).

To assure that you have not accidently turned on the built in timer, I suggest that you start by taking out the batteries, and insert them again (to reset the candle). First you turn on the candle by pushing the on/off button with a single push (don’t hold the on/off in too long, as that is how you activate the built-in timer), then turn off the candle with the remote, and turn it on. Hereafter you can operate the candle with the remote.